User's Manual

3/24/05 Step 3: Preparing Mounting Locations
90-100xxx-001 5
Step 3: Preparing Mounting LocationsStep 3: Preparing Mounting Locations
On your map, you should have the Airespace 1300 locations, mounting options, and power options.
• Find the required mounting locations.
• Use the ceiling/wall-mount base to mark the wall or ceiling locations for sheet metal, drywall, or
other screws. Make sure you leave enough space around the Airespace 1300 and base to plug
the CAT-5 cable, optional external antenna cable(s), optional power supply cable.
Figure - Factory-Supplied Mounting Options
Figure - Factory-Orderable Pole Mounting Bracket
• Route the CAT-5, power supply, external antenna cable(s) to where they can plug into the
Airespace 1300. Make sure to leave about 6 inches (15 cm) of slack in the cables for future
modifications.
• Attach the brackets to the wall or ceiling, or install screws for ceiling-mount base:
- Where you are going to use the bracket, use customer-supplied sheet metal, drywall, or
other screws to attach the bracket to the ceiling or wall.
- Where you are going to use the ceiling/wall-mount base, install customer-supplied
sheet metal, drywall, or other screws.
You are now ready to install the Airespace 1300s. Continue with Step 4: Mounting the Airespace 1300s
.
TBD
TBD