User's Manual

3/24/05 Step 2: Configuring the Airespace 1300 Before Installation
90-100xxx-001 4
Step 2: Configuring the Airespace 1300 Before InstallationStep 2: Configuring the Airespace 1300 Before Installation
The following procedures are designed to make sure that your Airespace 1300 physical installation goes
smoothly and that initial operation is as expected. If you are unable to prepare your Airespace 1300 for
deployment, this step also describes RMA (Return Material Authorization) procedures.
If you are unable to perform this procedure, refer to the RMA Procedures
section in the Airespace
Product Guide.
Use the AP Configuration Tool User Guide
to configure the Airespace 1300 before installation.
(This section To Be Determined.)
After completing Step 2: Configuring the Airespace 1300 Before Installation for all Airespace 1300s,
continue with Step 3: Preparing Mounting Locations.
Note: Perform the following procedure on each Airespace 1300 BEFORE deploying
the it in its final location.