User's Manual

3/24/05 FCC Statements for Airespace APs
90-100xxx-001 10
About Mounting OptionsAbout Mounting Options
• When you are mounting the Airespace AP on a pole, use the optional pole-mount bracket. Use
the bracket to mark the screw locations.
FCC Statements for Airespace APsFCC Statements for Airespace APs
This section includes the following FCC statements for the Airespace AP:
• Class A Statement
• RF Energy Exposure Warning
• Non-Modification Statement
• Deployment Statement
Class A StatementClass A Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
RF Energy Exposure WarningRF Energy Exposure Warning
This radio transmits a high level of RF energy. FCC safety regulations require that personnel working in
close proximity to the radio (within 20 cm) should take precautions to minimize their exposure to the
RF energy. This can be accomplished by:
• Remaining within 20 cm of the antennas only for short periods of time.
• Remaining further than 20 cm away from the unit whenever possible.
• Turning the radio off if it is necessary to be with 20 cm of the radio for a prolonged period of
time.
• This radio must only be installed in a location that will ensure that a separation distance of
20 cm between the radio and the general public is maintained at all times.
Installers of the radio and end users of the Airespace Wireless Enterprise Platform must adhere to the
installation instructions provided in this manual.
Non-Modification StatementNon-Modification Statement
Use only the supplied internal antenna, or external antennas supplied by the manufacturer. Unautho-
rized antennas, modifications, or attachments could damage the badge and could violate FCC
regulations and void the user’s authority to operate the equipment.
Deployment StatementDeployment Statement
This product is certified for outdoor deployment only.
EU Regulatory InformationEU Regulatory Information
Compliance Information for Model 1300 Airespace Access Points:
1. Standards met:
- Radio: EN 301 328, EN 301 893