Use and Care Manual

PAGE:3/ 4
Turn ON the electric power at the
main fuse or circuit breaker box.
Fig.14
Attach the glass shade and the end cap to the fan light and secure it with
finial. Take care to align the holes on the glass shade and the end cap, so
that the pull chains pass through and move freely.
Glass Shade
Fan Light
End Cap
Finial
Fig.13
Fan Speed Pull
Chain
Fan Light Pull Chain
Forward
Reverse
Reverse Switch
Fig.15-a
The slide switch sets the direction of fan rotation. Select the direction of fan rotation
you need by sliding the switch.
Push the slide switch bottom for " Forward" and top for "Reverse".
CAUTION: If you install a Wall Control for this fan, make sure to use the pull
chains to select the "high" position for the fan speed and the "on" position
for the fan light.
Fig.15-b
Slide Switch
Reverse
Forward
F A N C O
101203