User manual

U-Ground User Manual - Joystick

5.2

Configuration for Futaba Joystick

Airelectronics supplies a Futaba emitter ready to be plugged to U-Ground. Configuration should

be not altered for the proper operation of the system.

For reference, we include hereby the proper configuration for a Futaba:

Feature Proper Setting (T7CP) Proper Setting (T6J)

Modulation PCM/PPM (depends on model) N/A

Channel 5 switch Switch D N/A

Channel 7 switch Switch B N/A

Sub-Trim All set to 0 All set to 0

Dual Rates 100% N/A

Exponential 0% 0%

End points 100% 100%

Reverse Normal for all channels Normal for all channels

Throttle-cut Inhibited Inhibited

Fail-safe Normal in all channels Normal in all channels

Modulation must be set to PCM in Futaba T7CP variant to work with U-Ground. In case you need

to adjust modulation, follow the following instructions

Open Basic menu, then open

PARAMETER.

for 1 second. (If ADVANCE,

again.)

or to PARAMETER

Go to MODUL and change setting.

to MODUL to PCM.

PCM flashes on screen

Close menu and cycle power.

Power Off. Power On.

For the rest of settings, please, check the manual of the joystick.

Please, check with the software (U-See) that the joystick sticks movement correspond to the

following figure (In U-See, View Joystick→ ).