User manual

U-See User Manual - Settings Menu
2.12.4
2.12.4
Camera Joystick
Camera Joystick
This dialog allows configuration and operation of a HID compatible joystick for camera
control and operation.
Joystick used for control can be selected and opened
21
, besides configuration of the axis
and buttons used for functionality.
Current status of joystick is shown through drawn schematics. On the right, various drop
downs allows selection axis or button associated to funcionality:
• Slow Button: A button that when kept pressed will reduce joystick sensitivity for fine
tuning of camera pointing
• Fast Button: A button that when kept pressed will increase joystick sensitivity for
fast movement of camera.
• Pan Axis: Axis in joystick that will move the camera in pan.
• Tilt Axis: Axis in joystick that will move the camera in tilt.
• Roll Axis: Axis in joystick that will move the camera in roll.
On the bottom of the dialog, dead zone in the joystick axes can be adjusted via a slider.
21 Software will open at startup last joystick used.
Document Version 1.25 62
Figure 54: Joystick settings window
Figure 53: Manual trim window