User manual

U-See User Manual - Post-Flight Menu
Data Units
Pitch [Degrees]
Roll [Degrees]
Yaw [Degrees]
Commanded Pitch [Degrees]
Commanded Roll [Degrees]
Commanded Yaw [Degrees]
ADC Channel 1 [Volts]
ADC Channel 2 [Volts]
ADC Channel 3 [Volts]
ADC Channel 4 [Volts]
Altitude [meters]
latitude [Degrees]
longitude [Degrees]
IAS [km/h]
Ground Speed [km/h]
Commanded IAS [km/h]
Commanded Altitude [m]
Speed North [km/h]
Speed East [km/h]
Speed Down [km/h]
Table 5: Data exported for analysis available to the end user
2.11.1.1.2 Camera shots position file TXT
This expansion format is intended for post-process of topography and agriculture studies
flights. It will export the main information regarding camera shoots coordinates, plane
attitude and time of the shoot.
The filename will be that of the binary telemetry file appended with
“_Pointing_coordinates.txt”
Every line in the file is the position of a camera shoot.
The information contained into this file is structured in 18 columns, separated by tabulator
character according to the table 6. End of line is marked by \r\n special characters.
Document Version 1.25 58