User manual

U-See User Manual - Command Menu

If you wish to know if your autopilot supports this additional feature, please check your

autopilot version or contact us.

2.11

Post-Flight Menu

This menu contain options to analyze the data collected from an actual flight. The

operations contained in this section do not require communication to a U-Pilot

2.11.1

Record Data

→

.txt

This window is used to transform the binary-only telemetry files recorded on the Record

Data dialog to different (usually) text-based formats.

The window presents a button for selecting a binary telemetry file and an output format

selector.

Once the Start button has been clicked, the conversion will start converting the file to the

selected format. The text-version file will be located in the same directory than the

selected binary file, so it is necessary that the file is located in a write-accessible location.

2.11.1.1 Current available formats:

2.11.1.1.1 Aircraft Telemetry TXT

This format exposes the main variables of the flight in a text file suitable for analysis with

Microsoft Excel, LibreOffice/OpenOffice Calc, Matlab and similar.

The filename will be that of the binary telemetry file appended with “.txt”

The information contained into this file is structured in 20 columns, separated by tabulator

character and end of line is marked using \r\n special characters, according to this table:

Document Version 1.25 57

Figure 49: Recorded data->.txt Window