User manual

U-See User Manual - Command Menu

• Lateral: Special mode for one-axis roll mounted cameras. This mode keeps a fixed

angle with the horizon and enables stable observation of a on-ground point while in

orbiting with a considerably lighter and simpler camera setup.

Besides, you can command the zoom level of the camera through the slider.

2.10.3

Landing Control window (Optional)

Designed for fixed wing landing operation, this window won't be available. while operating

a rotary wing aircraft.

The window is designed to reduce clutter interface while in landing phase by showing only

landing related commands and information.

This windows is composed of a profile view of the landing manoeuvre. It will show current

aircraft position and altitude, the current commanded altitude (Yellow horizontal line) and

hold level altitude, besides field landing elevation.

Below the profile display, an embedded version of the command aux surfaces is available.

This allows manual override of the flaps and airbrakes in the aircraft.

Mode command is also available, with only landing-relevant modes available with the

buttons located at the right bottom corner.

When in final approach mode, a progress bar will show how many meters are left for the

flare phase and an extra button to force flare mode will be displayed.

Document Version 1.25 55

Figure 46: Landing Control window