User manual

U-See User Manual - Pre-Flight Menu
2.9.1
2.9.1
Checklist
Checklist
The checklist tool allows the user to run a
series of pre-flight checks in order to
prevent errors during operation. The
checklist widget is able to keep in memory
up to 5 pre-designed checklists. The
checklists are defined in text files and can
be provided by Airelectronics or custom-
made by the client.
The checklist main window allows the user
to add, remove or run up to 5 checklists.
When adding a checklist, the software will
ask the user for the location of the checklist
file and will notify if there are any problems
with the file.
The checklist files must have the following structure.
First Line: checklist Title
Second Line: creation date (DD/MM/YYYY)
Third Line: author (e.g. Airelectronics)
Fourth Line: BEGIN (checklist start mark)
Next Lines: checklist points, one point per line
Last Line: END (checklist end mark)
Material Skywalker
04/12/2013
Airelectronics
BEGIN
Point 1 to check
Point 2 to check
…
Point N to check
END
Text 1: Example checklist file
When a checklist is successfully loaded, it will appear in the checklist window with the run
button enabled. Clicking this button will start the checklist process asking the user if that is
the correct checklist to run.
During each check of the checklist, the software will block the “Next” button for a few
seconds, preventing the user from skipping points.
Document Version 1.25 38
Figure 32: Checklist main window