Instructions / Assembly

ATTACHING THE FAN BLADES

Insert one fan blade into the blade slot on the motor housing and secure with the ber washers and screws.

Securely tighten screws. Repeat process with other blades. (Fig. 22)

Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not remove)

Step 2. Place the key holes from the light kit over the 2 screws previously loosened from the mounting ring, turn light kit

until it locks in place at the narrow section of the key holes. Secure by tightening the 2 screws previously loosened and the

one previously removed. (Fig. 23)

FIG. 22

FIG. 23

INSTALLING THE LIGHT KIT PLATE

BLADE

SLOT

SCREWS

FIBER WASHER

LIGHT KIT

PLATE

SCREWS

MOUNTING RING