Instructions / Assembly

ATTACHING THE FAN BLADES

Insert one fan blade into the blade slot on the motor housing and secure with the blade support plates and screws.

Securely tighten screws. Repeat process with other blades. (Fig. 15)

Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not remove)

Step 2. Place the key holes from the mounting plate over the 2 screws previously loosened from the mounting ring, turn

mounting plate until it locks in place at the narrow section of the key holes. Secure by tightening the 2 screws previously

loosened and the one previously removed. (Fig. 16)

FIG. 15

FIG. 16

FAN BLADE

SLOT

BLADE

SUPPORT

PLATES

SCREWS

INSTALLING THE MOUNTING PLATE

MOUNTING

PLATE

SCREWS

MOUNTING RING