Owner`s manual

IBIS Mk II Installation Instruction
6/8/2010 Page 3 of 9
2. Install self adhesive gasket
1. The roof area must be clean and dry and free from grease or oil 2. Remove paper backing from the roof sealing gasket and position over square hole as shown 3. Gasket must be applied with the self adhesive side down. Note orientation of gasket to direction of travel. 4. Press gasket down firmly to ensure good adhesion 5. Run a bead of silicone between the roof and the gasket around the entire perimeter of the gasket
Front of
Caravan