Specifications

HighInletTemperatureRefrigeratedAirDryer
9
Purpose and Intended Use
Highinlettemperaturerefrigeratedairdryersare
designed for the purpose of removing moisture
from the compressed air by using mechanical
refrigeration and providing dew points as low as
(48°F-50°F).Thesedryersareusedtoprotect
industrial compressed air systems, machinery, and
tools. They are designed to deliver the required
dew point at specified inlet air temperature, inlet
air pressure, inlet flow and ambient temperature
conditions.Toensuremaximumperformanceand
safe operation of this dryer, everyone associated
with its installation, operation, and maintenance
must read and carefully follow the instructions of
this manual.
CAUTION!
• Misuseormodificationofthis
equipment may result in personal
injury.
• Donotmisuseormodify.
Inspection on Arrival
All high inlet temperature series dryers are tested
andoperatedbeforeshipment.However,shipping
vibration may cause damage such as loosening of
certain parts. To ensure smooth installation, it is
recommended that immediately upon receipt of the
unit, the system is checked for the following:
1. Inspect unit on delivery.
2. Reportanydamagetothedeliverycarrier.
3. Requestawritteninspectionreportfromthe
Claims Inspector to substantiate the claim.
4. File claims with the delivery carrier.
5. Compareunitreceivedwithdescriptionof
product ordered. Check the data label and
makesurethatitisthecorrectModelthatyou
had ordered. Note the equipment Capacity and
PowerSupplyrequirementsandensurethatthey
are in accordance with your specifications. The
rated conditions of the dryer are indicated on
the serial plate label. If there is any discrepancy,
contact your representative listed on the manual
back cover.
6. Vibrationduringshippingcanloosenthe
connections.Soinspectallpipeandtubingand
make sure they are all tightened and secured.
7. Observe pressure of refrigerant analyzer gauge
(suction) to determine if refrigerant has leaked
out during transit. If the gauge reading does not
match that mentioned on the serial plate label,
immediatelycontactTechnicalSupportlistedon
the manual back cover.
8. Reportincompleteshipmentstothedelivery
carrier and your service representative.