Specifications

10
Lifting Information
1. Useallliftingpointsprovided.Specialcaremust
be used when lifting the dryer to prevent tip-
over.
2. Use clevis connectors, not hooks, on lifting
slings.
3. Only lift unit under support frame/base by using
theforkliftopeningsprovided.Donotliftby
piping.
4. Checktheapproximateweightprovidedon
the specification control drawing to ensure
adequate lift truck capacity.
5. Allowonlyqualifiedoperatorstoliftthe
equipment.
6. RefertoapplicableOSHAregulationsandlocal
codes when using cranes, forklifts, and other
lifting equipment.
WARNING!
• Failuretolifttheunitcorrectlycan
result in severe personal injury or
property damage.
• Useappropriateliftingequipment
and adopt all safety precautions
needed for moving and handling the
equipment.
• Ahandcart,forkliftorcraneis
recommended for unloading and
installation.
• Liftunitbyliftinglugsandframe
only.Donotliftbypiping.
Installation Codes and Procedures
WARNING!
• Followproperlockout/tagout
procedures before performing
service or maintenance work.
• Electricalinstallationmustbe
performed by a qualified electrician
and comply with all applicable
national and local codes.
1. Safeandefficientoperationoftheunitdepends
on proper installation.
2. Authorities with jurisdiction should be
consulted before installing to verify local codes
and installation procedures. In the absence
of such codes, install unit according to the
National Electric Code and NFPA No. 70-latest
edition.
3. A qualified installation and service agent
versed in all regulatory codes must complete
installation of this unit.
CAUTION!
• AcopyoftheOperationManual
must be made available to all
personnel involved with the
installation, operation and
maintenance of the equipment,
to avoid injury to personnel or
property damage.
• Appropriatetoolsmustbeusedfor
all installation and maintenance
work, to avoid injury to personnel
or property damage.
AircelDHTSeries-Models20-125