Specifications

HeatlessRegenerativeDesiccantAirDryer
9
Inspection on Arrival
All Aircel dryers are tested and operated before
shipment. However, shipping stresses have the
potential to cause damage to the unit. To ensure
smooth installation, it is recommended that
immediately upon receipt of the unit, the system is
checkedforthefollowing:
1. Makesureyouhavereceivedallthecrates/
packagesthatareindicatedinthepackingslip.
2. Removethecrateandpackaging.Inspectthe
unit for any visible damage.
3. Report any damage to the delivery carrier.
4. Request a written inspection report from the
ClaimsInspectortosubstantiatetheclaim.
5. Fileclaimswiththedeliverycarrier.
6. Compare unit received with description of
productordered.Checktheserialplatelabel
andmakesurethatitisthecorrectModelwas
ordered.NotetheequipmentCapacityand
PowerSupplyrequirementsandensurethatthey
are in accordance with your specifications. The
rated conditions of the dryer are indicated on
theserialplatelabel.Ifthereisanydiscrepancy,
contact your representative listed on the manual
backcover.
7. Shippingstressescanloosenconnections.
All pipe and tubing connections should be
inspected.
8. Report incomplete shipments to the
delivery carrier and your Aircel service
representative.
CAUTION!
• Donotmisuseormodifyunderany
conditions.Misuseormodification
of this equipment may result in
personal injury.