User guide

Use Your Mobile Hotspot
Rev 1 Nov.13 41
5. If desired, change the name used to access AT&T Unite Pro Manager (maximum
31 characters).
6. If desired, change the Admin Login (maximum 31 characters).
7. Click Submit. (Submit button appears once you make a selection.)
Note: If you forget the Admin login, you can check it on the mobile hotspot. Tap Settings > About
Device > Device Information.
Change Wi-Fi encryption settings
You can set the mobile hotspot’s Wi-Fi encryption settings in the AT&T Unite Pro
Manager homepage.
On the AT&T Unite Pro Manager homepage:
1. Log in as Administrator.
2. Click Wi-Fi on the navigation menu on the left side.
3. Click the Options tab.
4. Select the desired encryption options for the Main Wi-Fi and the Secondary / Guest
Wi-Fi networks. (It is recommended that you use WPA2 Personal AES whenever
possible.)
The Encryption options (for 802.11 B/G/N mode, the most common mode) are:
· WPA2 Personal/AES — Strong security supported by newer Wi-Fi devices
(default)
· WPA/WPA2 (Personal) — Strong security supported by most Wi-Fi devices (Use
this if you want to connect Wi-Fi devices that do not support WPA2 Personal
AES.)
· None — Not recommended. Anyone can access your Wi-Fi network without a
password and you are responsible for charges incurred.
The options available depend on the Wi-Fi Mode. If you want to choose a Wi-Fi
encryption other than WPA2 Personal AES or WPA/WPA2 Personal:
a. Change the Mode to the encryption type you want to use.
b. Select the desired encryption options.