User guide

Get Started
Rev 1 Nov.13 15
Connect devices to your mobile hotspot’s Wi-Fi
You can connect up to 15 wireless devices such as smart phones, laptops, tablets,
digital cameras, printers, gaming consoles, and digital picture frames to your mobile
hotspot’s Wi-Fi network(s). (See Set maximum number of connected devices on
page 25 for instructions on setting connections for the Main Wi-Fi and
Secondary / Guest Wi-Fi networks.)
You can connect:
• A wireless device to your Wi-Fi network by typing the Wi-Fi password
• A WPS-enabled wireless device by pressing the icon on the mobile hotspot and
the WPS button on the device
Note: You can also connect a single device directly to the hotspot using the USB cable. (If you
have USB tethering enabled. See Enable / disable USB tethering on page 29.)
Connect a wireless device manually
To connect a wireless device to your mobile hotspot’s Wi-Fi network, see Connect to
the Internet on page 14.
Connect a WPS-enabled wireless device
You can connect a WPS-enabled Wi-Fi device to your Wi-Fi network without a Wi-Fi
password from the mobile hotspot or the AT&T Unite Pro Manager homepage.
On the touchscreen:
1. On the home screen, tap Wi-Fi .
2. Tap WPS .
3. Tap Pair with Main Wi-Fi or Pair with Secondary Wi-Fi (if Secondary / Guest
Wi-Fi is enabled).
4. Within two minutes, press the WPS button on the wireless device you want to
connect.
Your mobile hotspot and the wireless device will communicate and establish the
connection.
On the AT&T Unite Pro Manager homepage:
1. Log in as Administrator.