Instructions / Assembly

3
Visit WWW.GEMMY.COM for more information.
©2017 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 [phone]
MADE IN CHINA / PRINTED IN CHINA
9. What if it is raining or snowing? Will this affect my Animated
Airblown
®
?
Operation of your Animated Airblown
®
during light weather
conditions, such as a gentle rain or snowfall is recommended.
However, operation of your Animated Airblown
®
during
extreme weather conditions is not recommended, as your
item may become damaged or inundated with moisture. Do
not store the Animated Airblown
®
when it is wet.
10. What if water has soaked my unit while unplugged?
Move the unit to a dry location and plug in the unit. The fan
will dry the Animated Airblown
®
.
11. My Animated Airblown
®
has been deflated and it is covered
with snow. Can I simply re-inflate it?
If your Animated Airblown
®
is covered in a light dusting of
snow, simple re-inflation should not harm the unit. However,
if the deflated unit has been subjected to a large amount
of snow and/or ice, do NOT attempt to re-inflate. Rather,
carefully remove the item from the extreme condition (i.e.
bring it indoors) and allow the unit to thaw before re-inflating.
This helps prevent cracks and/or tears in the materials.
12. What if it’s raining or snowing? Will this affect my Animated
Airblown
®
?
Operation of your Animated Airblown
®
during light weather
conditions, such as a gentle rain or light snowfall is fine.
However, operation of your Animated Airblown
®
during
extreme weather conditions such as heavy snow, rain or
windstorms is not recommended as it may become over-
weighted and damage the unit.
13. I have stored my Airblown
®
Inflatable for several months and
now the motor does not work?
Sometimes the air intake may be blocked by loose grass/
leaves or other particles. Gently shake, knock or tap the
motor and see if it will operate again.
WARNING
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
THESE INSTRUCTIONS ARE FOR
THESE ITEMS
70973 89898 72094 74290
72196 13242