Instructions / Assembly

2
7. Insert the tether stakes into
the ground and attach the
tethers(See illustration 4).
8. To deflate, unplug fan.
For faster deflation, unzip
zipper after unplugging fan.
Do not unplug by pulling on
cord.
USER SERVICING INSTRUCTIONS
Lamp Replacement
Disconnect the plug from the electrical outlet and allow the lamp
to cool completely before replacing bulb. Do not touch the bulb
when the power is “ON” as it is extremely hot and make cause
electrocution.
1. Grasp plug and remove from receptacle or other outlet device.
Do not unplug by pulling on the cord.
2. Open the zipper opening on the Airblown
®
Inflatable.
3. Open the protective light cover carefully by pressing down on
the two locking side tabs simultaneously.
4. Replace lamp with same type 7W maximum, candelabra
base, UL classified.
5. Do not over-tighten the lamp as this may damage the lamp or
lamp holder.
Replace only with same type C7, 7 Watt Max Candelabra-base
120 Volt UL Classified lamps.
CAUTION
Fuse Replacement
WARNING:
Risk of Fire:
Replace only with same size
and type of fuse.
WARNING:
Risk of Fire:
Do not replace the
attachment plug. Contains a safety
device (fuse) that should not be removed.
Discard product if attachment plug is
damaged.
1. Grasp plug and remove from the
receptacle or other outlet device. Do not unplug by pulling on
the cord.
2. Open fuse cover. Slide open the fuse access cover on top of
the attachment plug towards blades. (See illustration)
3. Remove fuse carefully.
4. Replace fuse only with 5 Amp Max, 125 Volt (provided with
product).
5. Close the fuse cover. Slide closed the fuse access cover on
top of the attachment plug.
CAUTION
To reduce the risk of fire do not deliberately reposition either
lamp holder contact.
Do not attempt to inflate your Airblown
®
Inflatable during unusually
strong winds. If it becomes too windy for safe operation, simply
allow your Airblown
®
Inflatable to deflate and wait for better
conditions before re-inflating.
Protect the electric fan and power cord from direct exposure to
water. This precaution will reduce the risk of electrical shock.
When the temperature is below 14° F (-10° C), the motor may
temporarily stop running. The motor will begin functioning again
higher temperatures.
WARNING
Remove all plastic fasteners and tags. These are part of the
packaging and should be discarded.
This item is not a toy and should be used for decorative purposes
only.
For indoor and outdoor use.
120 V 60 Hz.
TROUBLE SHOOTING CHECKLIST
If your Animated Airblown
®
Inflatable is not inflating, the problem
may be:
1. The power source is disabled or the cord may be unplugged.
2. Debris may be lodged in the motor.
3. The zipper may not be securely fastened, sealing the Animated
Airblown
®
Inflatable.
4. The temperature may be below 14° F (-10° C).
5. Heavy rain or snow may have weighed down the unit. Unplug
unit, remove any water or snow from inside fabric folds.
NOTE: ONCE FAN IS UNPLUGGED AND STOPS BLOWING,
YOUR Animated Airblown
®
Inflatable WILL DEFLATE.
FREQUENTLY ASKED QUESTIONS
(FAQ’s)
1. Can I continually run my Animated Airblown
®
Inflatable?
Yes, you can run your Animated Airblown
®
Inflatable during
the day and at night. We recommend that you turn off your
Animated Airblown
®
Inflatable when leaving the immediate
area and when retiring for the evening. Otherwise, your
Animated Airblown
®
Inflatable is designed to run continually
as you see fit.
2. What happens if my Animated Airblown
®
Inflatable becomes
torn?
Rips in the Animated Airblown
®
Inflatable can be sewn
by hand (no special thread is required) or taped with clear
packing tape.
3. How can I clean my Animated Airblown
®
Inflatable?
Wipe clean with a damp cloth and allow to dry before
storing away. Use mild detergent if necessary.
4. When I unplug my Animated Airblown
®
Inflatable, it deflates. Why
is this?
Your Animated Airblown
®
Inflatable will not stay inflated
unless it is plugged in and the fan is blowing air.
5. My Animated Airblown
®
Inflatable isn’t moving. What can I do?
It is possible for the action components within your Animated
Airblown
®
Inflatable to become slightly tangled. If there is
no action, attempt to straighten your Animated Airblown
®
Inflatable to remove wrinkles and folds. Also, re-check all
zippers to insure they are fully closed. Lastly, recheck the
outlet, unplug and plug in again to insure it is properly
plugged in. If this does not work, please contact Gemmy’s
Customer Service Department.
6. How much electricity does an Animated Airblown
®
Inflatable
consume?
Please refer to the electrical approval label for wattage.
7. What is the best way to store my Animated Airblown
®
Inflatable?
Store in a bag, box or other storage container and keep in
a cool, dry location.
8. Can I leave my Animated Airblown
®
up in extreme weather
conditions or freezing temperatures?
We do recommend the consumer take appropriate precautions
to protect the unit. The Animated Airblown
®
will operate at
temperatures below freezing, but we do not recommend
operating the Animated Airblown
®
if temperatures drop
below 14° F (-10° C).
illustration 4