Instruction Manual

Troubleshooting

Issue - Burst disc failure

- Resolution - Should the burst disc fail

during use of the compressor, depress

the ON/OFF button and make sure the

compressor has stopped. Open the

Pressure Release Valve to let the

remaining air vent from the compressor.

Once you have veried the burst disc

has failed (there will be a hole in it) by

removing the burst disc retention screw

(pictured right), remove the broken burst

disc from the unit. You will nd

additional burst discs in the bag of spare

parts that comes with the compressor.

Install a new burst disc, and re-insert

the burst disc retention screw by turning

clockwise. If you do not have additional

burst discs, contact Air Venturi for

replacement at: 216-220-1180.

2018 / www.airventuri.com / 216-292-2570

In the unlikely event that your compressor malfunctions, DO NOT ATTEMPT

TO FIX THE PROBLEM YOURSELF. Please call Air Venturi’s service line so we

can address any issues or have you return the compressor for repair. Air

Venturi Service Line: 216-220-1180

Issue - Compressor will not start

- Resolution - Make sure power converter is plugged into a functional electrical

outlet and make sure power converter is properly plugged into the compressor.

If using a 12V battery, make sure the jumper cables are properly connected as

detailed in the instructions.

Issue - Compressor is not building pressure

- Resolution - Make sure the moisture release valve and the pressure release valve

are closed. They should be hand tightened. If release valves are closed and the

compressor is still not building pressure, contact Air Venturi by calling:

216-220-1180.

Issue - Compressor shuts off before reaching desired pressure.

- Resolution - Make sure the Output Pressure Dial (Auto Shut Off) is set properly.