Instruction Manual

8) Press the ON/OFF button down once to start lling.

NOTE: You can stop the ll process at any time by pressing the

ON/OFF button down. If you do stop the ll for any reason,

simply depress the ON/OFF button again to resume lling.

9) Once the pre-set ll pressure is reached, the

compressor will stop.

NOTE: The cooling fans will continue to run.

10) Release/Bleed the pressure in the system by turning

the pressure release/bleed screw counter-clockwise.

11) Once the pressure is released and the pressure

gauge on the compressor reads 0 PSI/BAR,

disconnect the hose from the lled device by pulling

back the collar on the female quick disconnect tting

and at the same time, pulling it off of the male tting it

was connected to.

12) Disconnect the cables from the compressor by pulling

the yellow plug out of the outlet in the compressor. The

compressor will turn off once disconnected.

2018 / www.airventuri.com / 216-292-2570

Operation Instruction: 12V Battery

CAUTION:

Please keep ngers / hands / eyes

away from the small bleed hole on the side. Air and / or

liquid may be released at high velocity.