Instruction Manual

9) Press the ON/OFF button down once to start lling.

NOTE: You can stop the ll process at any time by pressing the ON/OFF

button down. If you do stop the ll for any reason, simply depress the

ON/OFF button again to restart.

10) Once the pre-set ll pressure is reached, the

compressor will stop.

NOTE: The cooling fans will continue to run.

11) Release/Bleed the pressure in the system by turning

the pressure release/bleed screw counter-clockwise.

12) Once the pressure is released and the pressure

gauge on the compressor reads 0 PSI/BAR, disconnect

the hose from the lled device by pulling back the collar

on the female quick disconnect tting and at the same

time, pulling it off of the male tting it was connected to.

13) Unplug the three prong connector from your

110V outlet to power down the Nomad.

Operation Instruction: 110V or 220V outlet

2018 / www.airventuri.com / 216-292-2570

CAUTION:

Please keep ngers / hands / eyes

away from the small bleed hole on the side. Air and/or

liquid may be released at high velocity.