Instruction Manual
4
© Air Venturi
®
2018 / www.airventuri.com / 216-292-2570
Setting up your Nomad Compressor
1) Attach the hose and output lter to the compressor
via the female quick disconnect tting. The end with
the lter should be closest to the compressor
(see
image for proper conguration).
2) Select the appropriate input voltage on the power
converter. The power converter is capable of running
on 110V or 220V input. Before adjusting, make sure
the converter is not connected to an active electrical
outlet.
3) Locate the adjustment window on the power
converter. Using an allen key, move the switch to
the desired input power setting. If the switch is on
the left, 110V is selected. If the switch is on the right,
220V is selected.
1
2