Use And Care Manual

2 of 2 A member service provided by the Asphalt Roofing Manufacturers Association
Revised May 2017
 Follow vent product manufacturers’ installation instructions. Model building codes require that the product
manufacturers’ installation instructions be followed.
Please note that some building codes require ventilation to be updated to code required levels when reroofing.
See ARMA’s “Ventilation” Fast Facts and ARMA’s Residential Asphalt Roofing Manual for additional information.
DISCLAIMER OF LIABILITY: This document was prepared by the Asphalt Roofing Manufacturers Association and is disseminated for informational purposes only.
Nothing contained herein is intended to revoke or change the requirements or specifications of the individual roofing material manufacturers or local, state
and federal building officials that have jurisdiction in your area. Any question, or inquiry, as to the requirements or specifications of a manufacturer, should be
directed to the roofing manufacturer concerned. THE USER IS RESPONSIBLE FOR ASSURING COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.
Nothing contained herein shall be interpreted as a warranty by ARMA, either express or implied, including but not limited to the implied warranties
of merchantability, fitness for a particular purpose or non-infringement. IN NO EVENT SHALL ARMA BE LIABLE FOR ANY DAMAGES WHATSOEVER,
including special, indirect, consequential or incidental damages or damages for loss of profits, revenue, use or data, whether claimed in contract, tort or
otherwise. Where exclusion of implied warranties is not allowed, ARMA’s liability shall be limited to the minimum scope and period permitted by law.