Instruction manual

9
UNPACKING AND INSPECTION
Unpacking
The ScanX may be shipped in a very special shipping case covered by a double-
wall corrugated over-packaging. A deposit fee has been paid for this case, which
may be returned to Air Techniques, Inc./ALLPRO Imaging for a full refund of the
fee using a Return Authorization (RA) number, or retained, without refund of the
fee, to protect the ScanX during transport or future shipping. Retain the over-
packaging to return the shipping case.
Included System Components
Each ScanX consists of the indicated main assembly and accessory kit as listed
below: (See SPECIFICATIONS for ratings and identification for specific models.)
ScanX
Intraoral,
P/N B7100
ScanX,
P/N B7200
Ortho ScanX,
P/N B7250
Main Assembly B7110 B7210 B7210
Accessory Kit containing:
Power Supply B7095 B7095 B7095
Power Cord 73096 73096 73096
Computer Connector Cable, USB B3554 B3554 B3554
Instruction Manual B7202 B7202 B7202
Instruction; Imaging Plate Warning,
Intensifier Use
- 73020 73020
Plate Transfer Box 73577 73577 -
PSP Protective Cushion Kit - 74030B 74030B
Size 2 Phosphor Storage Plates (Qty. 4)
73445-2
(Qty 5)
73445-2
(Qty. 5)
-
Plate Guides (Sizes 0, 1, 3, Qty. 1 ea.
and Size 2, Qty. 4)
73444 73444 -
Plate Guides (Sizes 0, 1, 2, 3, Qty. 1 ea.) - - 73199
Barrier Envelopes (Size 2, Qty. 300) 73248-2 73248-2 -
ScanX Cleaning Sheet Sample Kit - B2030 B2030
Drivers, Utilities and Instruction
Manual Disk
B7002 B7002 B7002
Inspection
Verify that all listed items were received. If any item is missing, notify your authorized
dealer. Unpack each component of the ScanX and inspect for physical damage
such as scratched panels, damaged connectors, etc. If any damage is noted,
notify your authorized dealer immediately so corrective action can be taken.