User manual

I-450-BE 21

Replacing the cooking chamber seal

The cooking chamber seal is subject to ageing and

deteriorates in time. It should therefore be replaced at the

first sign of hardening, breaking or cracking.

To replace, proceed as follows:

Manually remove the seal from its groove.

Clean any traces of dirt to be found in the seal groove and

apply a little heat-resistant silicone in the four corners.

Fit the new seal and apply silicone on the borders for sealing.

First of all insert the seal into the four corners. Make sure

it is correctly inserted into these points.

Replacing the cooking chamber light bulb

If a cooking chamber halogen light burns out and therefore

needs to be replaced, proceed as follows:

Disconnect the appliance from the electricity mains supply.

Remove the light bulb guard ring using a screwdriver.

Remove the halogen light. Using a cloth or a glove as

protection, remove the new halogen light from its packing

and insert it into the lamp-holder.

Never touch the halogen lamp with bare hands.

Only use halogen lights supplied by the spare parts after-

sales service. Clean the protective glass and screw it back

into place with its guard and seal.

Maintenance contract

Dear Sir/Madam,

Apart from the regular cleaning and maintenance

operations, your air-o-steam

appliance should undergo

maintenance by a qualified technician to ensure that its

qualities remain unchanged.

We therefore advise you to take out a maintenance contract

so that you can enjoy maximum operating safety.

Please contact your supplier.

Under your maintenance contract, your appliance will

undergo complete checks at programmed intervals when

any necessary adjustment and maintenance operations will

be carried out.