User manual

14
I-450-BE
STEAM 1 (Fig.3 No.13)
In this position the heating of the cooking chamber is
activated as well as the steam generator heating elements
in the proportion of 75% hot air and 25% steam.
STEAM 2 - REGENERATION (Fig.3 No.14)
In this position the heating of the cooking chamber is
activated as well as the steam generator heating elements
in the proportion of 50% hot air and 50% steam.
COOK AND HOLD (Fig.3 No.7)
This patented low temperature cooking programme is
recommended for ”Hot-air and Steam” cooking modes. Upon
pressing the ”COOK & HOLD” button, the relative indicator
lights above these buttons start blinking.
If the desired cooking programme is chosen by pressing
the ”HOT AIR” or ”STEAM” button, a fixed programme is
set with the following sequence:
1.The heating power (hot air or steam) is reduced to 50%. 2.In
the same way, the fan rotation speed is also reduced.
In addition, the fan works intermittently after the regulated
temperature in the cooking chamber has been reached (low
temperature range). If this programme is activated, the
relative indicator light comes on. The cooking process is
switched off automatically once the set time has elapsed.
ECO-DELTA COOKING (Fig.3 No.9)
For this cooking process, a temperature value between
0°C and 99°C may be selected by which the cooking
chamber temperature will be above the product’s core
temperature.
Upon activating this programme, the indicator light above
the button comes on.
POWER STAGE SELECTION (Fig.3 No.6)
POWER STAGE 1
High fan speed - 100% heating power.
In neutral conditions, i.e. when the electrical circuit is
activated, the two indicator lights are off.
POWER STAGE 2
Reduced fan speed - 100% heating power.
By pressing the button once, the indicator light above the
fan symbol comes on.
POWER STAGE 3
High fan speed - 50% heating power.
By pressing the button a second time, the indicator light
above the coil symbol comes on.
POWER STAGE 4
Reduced fan speed - 50% heating power.
By pressing the button a third time, the two indicator lights
(fan and coil) come on.
Upon pressing the button again, the two indicator lights go
off and the control circuit goes back to its initial position,
i.e. in the power stage 1 position.
INTERMITTENT FAN OPERATION (Fig.3 No.8)
Intermittent fan operation is obtained in this position, i.e.
the fan starts and stops at programmed intervals. This
intermittent control is activated when the regulator stops
the heating of the cooking chamber; i.e. when the set
temperature inside the cooking chamber is reached. This
intermittent control does not depend on the programmed
fan speed. During the heating stage, the fan control is not
activated. When working with this version, the indicator
light above the button comes on.
PROGRAMMING COOKING START TIMES
(Fig.3 No.10)
With this function it is possible to memorize a specific
time; the appliance automatically comes on and starts the
set cooking process once the time set by means of this
button has elapsed. While this programme is in operation,
the indicator light above the button remains on.
After having programmed the cooking time, you have
to set the cooking proces you intend to use as in 2nd
Cook Step.
COOKING CHAMBER TEMPERATURE
(Fig.3 No.17)
Programming the desired temperature inside the cooking
chamber. The temperature may be set anywhere between
30°C and 300°C with hot air, using the knob. The temperature
range between 250°C and 300°C is limited to a time of 10
minutes. This enlarged temperature range ensures fast
preheating of the empty appliance or a high stand-by
temperature ready for loading the food. During the
programming stage the set temperature appears on the
display above the knob. If this value is not changed, the
appliance automatically changes to visualize the actually
measured cooking chamber temperature.
ACTUAL COOKING TIME (Fig.3 No.18)
Programming the desired cooking time. A cooking time of
anywhere between 1 minute and 8 hours may be set by
using the relative knob. During the programming stage the
set cooking time appears on the display above the knob.
Upon activating the cooking process the count-down runs
minute by minute and the remaining cooking time appears
on the display. Continuous operation is activated by
exceeding the setting of 8 hours; ”CONT” appears on the
display.
Note: selecting a cooking programme which stops the
cooking process when the set core temperature is reached,
excludes the possibility of programming a cooking time.
CORE TEMPERATURE (Fig.3 No.19)
With this procedure the cooking time depends on the set
core temperature of the roast. In fact, apart from the core
temperature, the only parameter to be set is the cooking
chamber temperature. The required temperature may be set
anywhere between 0°C and 99°C by means of the knob. During
the programming stage the set core temperature is indicated
on the display above the knob. If this value is not changed,
the appliance automatically changes to visualize the actually
measured core temperature.