Operating instructions
IM-P623-04 ST Issue 5
5
2. General product information
2.1 General description
The Spirax Sarco HP80, HP100, HP150 and HP210 bimetallic steam traps are made of forged
steel, and designed for draining high pressure, high temperature steam lines and processes.
These steam traps, which are specially designed for HP steam, have a reinforced stainless steel
insert within the body and can be repaired online.
Normally open in the event of failure, they have a retaining valve, a built-in strainer screen and
an external device for adjusting the discharge temperature of the condensate.
Standards
This product fully complies with the requirements of the European Pressure Equipment
Directive 97/23 / EC.
Certification
This product is available with certification to EN 10204 3.1. Note: All certification / inspection
requirements must be stated at the time of order placement.
Note:
For additional information see Technical Information Sheet TI-P623-06.
2.2 Sizes and pipe connections
Fig. 1 HP80 shown
½", ¾" and 1" Socket weld to ANSI B 16.11 or Butt weld to ANSI B 16.25.
HP80 and
Flanged PN63, PN100, ANSI 600, ANSI 900 and ANSI 1500
DN15, DN20
HP100
and DN25
HP150 and
Flanged ANSI 900, ANSI 1500 and ANSI 2500
HP210