User`s guide

32
4.7 Factory Default
You can reset the configuration of your 802.11A/G ACCESS POINT to the factory
default settings. To do it:
Step 1 Select Factory Default from the System Tools menu.
Step 2 Click YES to go ahead and restore the configuration to the factory default.
4.8 Reboot System
You can reset your 802.11A/G ACCESS POINT from the Browser. To reset it:
Step 1 Select Reboot System from the System Tools menu.
Step 2 Click YES to reboot the 802.11A/G ACCESS POINT.
Note: Rebooting the 802.11A/G ACCESS POINT disconnects any
active clients, and therefore will disrupt any current data
traffic.