User`s guide

31
Step 2 To update the 802.11A/G ACCESS POINT firmware, first download the firmware
from the distributor’s web site to your local disk, and then from the above screen
enter the path and filename of the firmware file (or click Browse to locate the
firmware file). Next, Click the Upgrade button to start.
The new firmware will be loaded to your 802.11A/G ACCESS POINT. After a message
appears telling you that the operation is completed, you need to reset the system to have the
new firmware take effect.
Note: It is recommended that you do not upgrade your 802.11A/G
ACCESS POINT unless the new firmware has new features you
need or if it has a fix to a problem that you’ve encountered.
4.6 Configuration Save and Restore
You can save system configuration settings to a file, and later download it back to the
802.11A/G ACCESS POINT by following the steps.
Step 1 Select Configuration Save and Restore from the System Tools menu.
Step 2 Enter the path of the configuration file to save-to/restore-from (or click the Browse
button to locate the configuration file). Then click the SAVE TO FILE button to
save the current configuration into the specified file, or click the RESTORE FROM
FILE button to restore the system configuration from the specified file.