User`s guide

4.4 Bridge Table

The bridge table shows all MAC entries learned from the wired LAN interface, wireless

clients, and WDS peers (if running in the WDS mode). You can check this table by clicking

Bridge Table at the left side of the Device Status window.

4.5 Firmware Upgrade

You can upgrade the firmware of your 802.11A/G ACCESS POINT (the software that

controls your 802.11A/G ACCESS POINT’s operation). Normally, this is done when a new

version of firmware offers new features that you want, or solves problems that you have

encountered with the current version. System upgrade can be performed through the System

Upgrade window as follows:

Step 1 Select System Tools, then Firmware Upgrade from the menu.