User`s guide

the interval is, the better the security is. 60 seconds is a reasonable time, and it is used by

default.

WPA

Wi-Fi Protected Access (WPA) requires a RADIUS server available in order to do

authentication (same as 802.1x), thus there is no shared key required. The Encryption

Type and Group Rekey Interval settings are the same as WPA-PSK.

3.1.4 FINISH SETUP WIZARD AND SAVE YOUR SETTINGS

After stepping through the Wizard’s pages, you can press the FINISH button for your

modification to take effect. This also makes your new settings saved into the permanent

memory on your system.

Congratulations! You are now ready to use the WLA-5000AP 802.11A/G ACCESS

POINT.

Note: If you change the device’s IP address, as soon as you click on

FINISH you will no longer be able to communicate with your

802.11A/G ACCESS POINT. You need to change your IP

address and then re-boot your computer in order to resume

the communication.