User`s guide

10
2
2. Install the WLA-5000AP 802.11
A/G Access Point
This section describes the installation procedure for the WLA-5000AP. It starts with a
summary of the content of the package you have purchased, followed by steps of how to
power up and connect the WLA-5000AP. Finally, this section explains how to configure
a Windows PC to communicate with the WLA-5000AP.
2.1 What’s in the box?
The WLA-5000AP package contains the following items:
 One WLA-5000AP

One 5V AC power adapter with a barrel connector

CD of the WLA-5000AP User Guide
2.2 Connect the cables
The Back Panel of the WLA-5000AP appears as follows:
Follow these steps to install your WLA-5000AP:
Step 1. Connect a LAN hub to the LAN port on the WLA-5000AP using the supplied
LAN cable.
Step 2. Connect the power adapter to an electrical outlet and the WLA-5000AP.
Note: You can reset the Access Point’s Settings to factory
defaults by pushing a paperclip in the RESET hole.
Push and hold until the lights at the front of the Access
Point are off.