User`s manual

If the Login Camera dialog box appears, make sure to enter the correct User Name and Password and click the

OK button. Then, the camera will be added into IPView SE in list format. If the User Name and Password is

entered incorrectly, the camera will not be added into IPView SE.

The above dialog box will appear only if administrator has already set up the User Name and Password in the

Web Configuration setting.

If you forget to highlight the camera you want to add, a dialog box will appear to notify you of the error.

Make sure to save any changes you have made to keep the information updated.

Note :

You are allowed to add only one camera at a time.

When the user adds the camera, four icons will appear, including: “Assign IP to Camera”, “Connect/Disconnect”,

“Erase”, “Extra Information”.

Motion record

Camera Config

Assign IP to Camera

Schedule record

Connect / Disconnect

Manual record

Erase Extra Information

AirLive WL-5400CAM User’s Manual