User`s manual

5
USING THE CAMERA
You can access and manage the AirLive WL-5400CAM Wireless Internet Camera through: 1) a web browser, and
2) the enclosed software IPView SE. This chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The AirLive WL-5400CAM Wireless Internet Camera must be configured through its built-in Web-based
Configuration. (Extensive knowledge of LAN will be helpful in setting up the AirLive WL-5400CAM Wireless
Internet Camera.)
From the web browser, enter the default IP address to access the Welcome screen of the AirLive WL-5400CAM
Wireless Internet Camera. To configure your
AirLive WL-5400CAM Wireless Internet Camera, type
http://192.168.0.20 in the address box. The number is the default IP address of your
AirLive WL-5400CAM
Wireless Internet Camera. Then, press [Enter].
NOTE: The computer’s IP address must correspond with the
camera’s IP address in the same segment for the two devices
to communicate.
Default IP address
Pre-view area
Welcome Screen of the Configuration Utility
After the default IP address is entered from the browser, the AirLive WL-5400CAM Wireless Internet Camera
Welcome screen will appear with a still image. There will be three options to choose from to set-up and view your
AirLive WL-5400CAM Wireless Internet Camera, including:
z View Video – ActiveX Mode
z View Video – Java Mode
z System Administration
AirLive WL-5400CAM User’s Manual
15