User`s manual

Fail Retries – This is the number of times the AP will restart the authentication

process with the client before returning an error.

Enable Reauthentication – If this control is checked, the AP will re-initiate

authentication whenever the specified amount of time has passed.

Enable WEP Key Delivery – If this control is checked, the AP will pass the WEP key

to the client after the authentication procedure has finished. This only applies when

the AP has WEP enabled, EAP-TLS is being used on the RADIUS server as the

authentication method, and the supplicant has been authenticated with the RADIUS

server.

Accounting Options

Figure 20. IEEE 802.1X panel – Accounting Options

Retries

– This is the number of times the AP will attempt to resend accounting

information to the server before returning an error.

Enable Interim Update – If this control is checked, the AP will periodically resend

any accounting information to the server. The update time can be set by the user.

Outdoor Access Point