User`s manual

86
Appendix Command Line Management
WH-5420CPE provides telnet and Secure Shell (SSH) for remote management. You can
use telnet or some free software such as putty
(http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html) as telnet/SSH client.
Refer to the following table for detail.
All commands will tack effect only after reboot
[Mode] Wireless Mode
sys
operation
<0:AP|1:Client|2:Bridg
e|3:WDS
Repeater|4:Universal
Repeater|5:WISP|6:WI
SP+Universal
Repeater|7:Gateway>
[Mode] Basic Settings
wlan
alias
[string]
active
[on|off]
chid
[channel_id|auto]
essid
[essid]
rssid
[rssid]
band
[b|g|bg]
mode
[client
<infrastructure|adhoc>
]
clone
[mac_addr|auto|manua
l]
encrypt
[both|wlan|wan]
wds
peer
disp
add [mac]
delete [id]
clearall
encrypt
[off]
wep [64|128]
<ascii|hex> <key>
wpa [tkip|aes]
<pass|hex> <key>
[gklt]
wpa2 [mixed|aes]
<pass|hex> <key>
[gklt]
stp
[on|off]