User`s manual

8. PTZ
AirLive SD-2020 User’s Manual 85
8.10 Camera-Misc1
In the Camera—Misc (Miscellaneous) Setups Menu 1, users can set various camera
parameters including Backlight Compensation (BLC), Sharpness, Exposures
Compensation (ExpComp), Image Flip, Speed by Zoom and ICR function. Each setting is
specified as follows:
- BLC
Users can choose to activate or disable the BLC function. Click on the button <Set> to
save the setting.
- Sharpness
Increasing the sharpness level can make the image looked sharper; especially
enhancing the object’s edge. The Sharpness value is adjustable from 1 to 15. Click on
the button <Set> to confirm the setting.
- Exp Comp
Users can define the value of Exposure Compensation; the value ranges from 1 to 15.
- Flip
Users can track an object continuously when it passes through under the Dome
Camera with setting Flip to Mechanical (M.E.) mode or Digital Flip (Image) mode.
NOTE: Flip setting is manual-controlled only. If a Preset Position or a point for other
function (ex. Sequence) is set in the position that can only be reached through FLIP
motion, when the Flip function is turned off, the position cannot be reached anymore.
NOTE: To make the Dome Camera tilt between a specific range, such as -10° to +100°
or -10° to +190°, please go to the Tilt Range setting page to set the tilt angle range.
Otherwise, the Dome Camera will tilt 90° as the default setting.
z M.E. Mode
M.E. is a standard mechanical operation. As the Dome Camera tilts to the
maximum angle, it will pan 180°, and then continue tilting to keep tracking objects.
z Image Mode
IMAGE represents digital IMAGE FLIP, which enables users to keep tracking
objects seamlessly; under the mode, almost no delay occurs in comparing with
that under the M.E. mode.