User`s manual

8. PTZ
AirLive SD-2020 User’s Manual 80
8.7 Privacy Mask
The Privacy Mask function aims to avoid any intrusive monitoring. When setting a mask, it
is suggested to set it at least twice bigger (height and width) than the masked object. The
Dome Camera will assume the center of the selected view as a starting point. Therefore,
please keep the target object / region nearly positioned in the center of the scene. Refer to
the following descriptions for setting a privacy mask.
NOTE: When the Privacy Mask function is enabled, the Flip function under Misc 1 setting
page will be disabled.
- Mask Setting
z Switch
The Privacy Mask function can be activated or disabled. Click on <Set> to save
the setting.
z Transparency
The Privacy Mask can be set as transparency if necessary.
z Color
Select a desired color from the <Color> drop-down list for the specified Privacy
Mask. Click on <Set> to save the Privacy Mask’s color properties.