User`s manual

8. PTZ
AirLive SD-2020 User’s Manual 76
Enter the speed ratio into the Speed field; the speed ratio ranges from 0 (low) to 3
(fast). Then choose to run the Auto Pan Path in right/left direction from the Direction
drop-down list.
Move the camera to another desired position as the end point of the Auto Pan Path.
Click on the <Set> button of the <End Point> for saving the setting.
- Auto Pan Run
Select the specified Auto Pan Path from the drop-down list, click on the <Run> button,
and then the camera will start moving horizontally as recorded.
To view the camera panning in full screen mode, please move the cursor onto the live view
pane, right-click and left-click to select “fullscreen”. Then users can view the camera
navigation in full screen.
To stop running an Auto Pan Path, simply move the cursor to the live view pane and move
the camera in any direction.