User`s manual

8. PTZ
AirLive SD-2020 User’s Manual 75
To view the camera touring around in full screen mode, please move the cursor onto the
live view pane, right-click and left-click to select “fullscreen”. Then users can view the
camera navigation in full screen.
To stop running a Cruise Path, simply move the cursor to the live view pane and move the
camera in any direction.
8.3 Auto Pan
The IP Camera supports four Auto Pan Paths. Please refer to the instructions below to set
an Auto Pan Path.
- Auto Pan Setting
To setup an Auto Pan Path, please select a path number from the drop-down list first.
Then move the cursor to the live view pane, and move the camera to a desired view as
the Start Point of an Auto Pan Path. Click on the <Set> button of the <Start Point> and
the current view will be automatically saved as the start point of the Auto Pan Path.
NOTE: The room ratio of an Auto Pan’s Start Point will persist throughout the whole
path.