User`s manual

8. PTZ
AirLive SD-2020 User’s Manual 74
- Preset Go
To have the camera move to a specified Preset position, please select the Preset Point
from the drop-down Preset list (click on <PrePage> or <NextPage> button to reach
preset number 1 to 256). Then the camera shall readily move to the target position.
8.2 Cruise
The IP Camera supports up to eight Cruise Paths. Please follow the instructions below for
Cruise Path setup.
- Cruise Setting
To setup a Cruise Path, please first select a path number from the drop-down list. Then
move the cursor to the live view pane, and move the camera to a desired view (PTZ
controls) as the start point of a Cruise Path. Click on the <Set> button of <Record
Start> and start programming the Cruise Path via PTZ controls. When finishing
programming, click on the <Set> button of <Record End> to quit. Then this Cruise Path
will be automatically recorded.
- Cruise Run
Select the specified Cruise Path from the drop-down list, click on the <Run> button,
and then the camera will start touring around as recorded.