User`s manual

7. Streaming
AirLive SD-2020 User’s Manual 69
7.3 Video OCX Protocol
In the Video OCX protocol setting page, users can select RTP over UDP, RTP over TCP,
RTSP over HTTP or MJPEG over HTTP, for streaming media over the network. In the case
of multicast networking, users can select the Multicast mode. Click on <Save> to confirm
the setting.
- Video OCX protocol
z RTP over UDP / RTP over RTSP (TCP) / RTSP over HTTP / MJPEG over HTTP
z Multicast Mode
Enter all required data, including <multicast IP address>, <Multicast H.264-1 /
H.264-2 / H.264-3 / H.264-4 Video Port>, <Multicast MJPEG Video Port>,
<Multicast Audio Port> and <Multicast TTL> into each blank.
¾ Multicast IP Address: Specify the multicast server address.
¾ H.264 Video / Audio Port: Specify the transmission port number of the
video data from 1124 to 65534.
¾ Time to Live: Set the maximum TTL that multicast can pass through.
The default value is 15.
Click on <Save> to confirm the setting.