User`s manual

6. System
AirLive SD-2020 User’s Manual 63
6.18 Software Upgrade
The procedure of software upgrade is as below:
- Step 1: Click on <Browse> and select the binary file to be uploaded, ex. userland.
NOTE: Do not change the upgrade file name, or the system will fail to find the file.
- Step 2: Pull down the upgrade binary file list and select the file you want to upgrade; in
this case, select “userland.img.”
- Step 3: Click on the <Upgrade> button. The system will check whether the upgrade file
exists or not, and then begin to upload the upgrade file. Subsequently, the upgrade
status bar will be displayed on the page. When it runs to 100%, the upgrade
process is finished.
After the upgrade process is finished, the viewer will return to Home page.