User`s manual

6. System
AirLive SD-2020 User’s Manual 61
- Parameter List
6.16 Factory Default
Users can follow the instructions on this page to reset the IP Camera to factory default
settings if needed.
- Full Restore
Click on the <Full Restore> button to recall the factory default settings. Then the system
will restart in 30 seconds.
NOTE: The IP address will be restored to default.
- Partial Restore
Press the <Partial Restore> button to recall partial default setting. Then the system will
restart in 30 seconds.
NOTE: The IP address will not be restored to default.
- Reboot
Click on the <Reboot> button, and the system will restart without changing current
settings.