User`s manual

6. System
AirLive SD-2020 User’s Manual 57
6.13 Schedule
This function allows the users to setup schedules for features including: <Alarm Switch>,
<Motion Detection> and <Network Failure Detection>. The function supports up to 10 sets
of time frames in the time frame list.
- Setting Schedules
To set a schedule, please select a time frame from the time frame list first. Then check
the boxes from below to choose the specific weekdays. At last, type in the start time
(hour:minute) and the duration time (hour:minute) for activation of the schedule
triggered features. The setting range for the duration time is from 00:00 to 168:59. Click
<Delete> to delete a chosen time frame. Please click on <Save> to save the setup.
NOTE: Users MUST select <By schedule> under each feature setting page to enable
the schedule function.