User`s manual

6. System
AirLive SD-2020 User’s Manual 47
6.9 Motion Detection
Motion Detection function allows detecting suspicious motion and triggering alarms when
motion volume in the detected area reaches / exceeds the determined sensitivity threshold
value.
The function supports up to 4 sets of Motion Detection Settings. Settings can be chosen
from the drop-down menu beside <Motion Detection>. In each set of setting, there is a
frame (Motion Detection Window) displayed on the Live Video Pane (shown as the figure
below). The Motion Detection Window is for defining the motion detection area. To change
the size of the Motion Detection Window, move the mouse cursor to the edge of the frame
and draw it outward / inward. Moving the mouse to the center of the frame can shift the
frame to the intended location.
Users can configure up to 10 sets of Motion Detection Windows in each set of Motion
Detection Setting. Click on the <add> button under the Live Video Pane to add a Motion
Detection Window. To cancel a Motion Detection Window, move the mouse cursor to the
selected Window, and click on the <delete> button.
If Motion Detection function is activated, the pop-out window (Motion) with indication of
motion will be shown.