User`s manual

6. System
AirLive SD-2020 User’s Manual 45
For instance, if the custom parameter is set as” action=1&group=2”, and the HTTP
server name is” http://192.168.0.1/admin.php”, the notification will be sent to
HTTP server as” http://192.168.0.1/admin.php? action=1&group=2” when alarm is
triggered.
z Record Stream to SD Card
Select the item and the alarm-triggered recording will be saved into the Micro SD
card.
Pre-trigger buffer recording function allows users to check what happened to
cause the trigger. The pre-trigger buffer time range is from 1 to 3 seconds. Select
<Upload for __ sec> to set the recording duration after alarm is triggered. The
setting range is from 1 to 99999 seconds. Select <Upload during the trigger
active> to record the triggered video until the trigger is off.
NOTE: Please make sure the local recording (with Micro SD / SDHC card) is
activated so that this function can be implemented. Refer to section Recording for
further details.
- File Name
Enter a file name in the File name field, ex. image.jpg. The uploaded image’s file name
format can be set in this section. Please select the one that meets the requirements.
z Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
z Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
z Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the setting is
up to “10,” the file name will start from 00, end at 10, and then start all over again.