User`s manual

6. System
AirLive SD-2020 User’s Manual 42
6.8 Application
The Camera equips four alarm inputs and two relay outputs for cooperating with alarm
system to catch events’ images.
- Alarm Pin Selection
Select an alarm pin (1~4) which is to be configured from the <Alarm Pin Selection> field.
Then click on the button <Edit> below the field to carry on alarm programming.
- Alarm Pin Status
z Alarm Setting
¾ Alarm Switch
The default setting for the Alarm Switch function is <Off>. Enable the
function by selecting <On>. Users can also activate the function
according to the schedule previously set in the <Schedule> setting page.
Select <By schedule> and click <Please select…> to choose the desired
schedule from the drop-down menu.
¾ Alarm Type
Select an alarm type, <Normal close> or <Normal open>, that
corresponds with the alarm application.
z Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take at an alarm occurrence.
All options are listed as follows: